Replacement planning guide
Gutter Replacement Cost Calculator
A full professional gutter replacement is commonly priced in the same $12 to $25 per linear foot range as gutter installation in HomeGuide's current guide. This page focuses on replacement scope, removal, and the repair-versus-replace decision.
Quick answer
$12–$25 per linear foot for full replacement
Source basis: HomeGuide, October 28, 2025. DWELVRA's “modeled typical” value is the arithmetic midpoint of a published range, not a measured national average.
Gutter Replacement Cost Calculator
Use this as a planning range, not a contractor quote. Only the inputs shown in the calculator affect the result; no hidden regional or complexity multiplier is applied.
Estimated project cost
Actual pricing can differ because contractor scope, location, access, materials and site conditions vary. DWELVRA is an independent informational publisher, not a contractor or professional estimator.
Modeled examples
| Project input | Low | Modeled typical | High |
|---|---|---|---|
| 100 LF | $1,200 | $1,850 | $2,500 |
| 150 LF | $1,800 | $2,775 | $3,750 |
| 200 LF | $2,400 | $3,700 | $5,000 |
| 250 LF | $3,000 | $4,625 | $6,250 |
Modeled typical values are calculated midpoints. They should not be described as source-published averages unless a source explicitly labels them that way.
Repair versus full replacement
HomeGuide's gutter-repair guide reports $100–$450 for common repair projects and $6–$17 per linear foot when replacing damaged sections. The same source says full replacement is often the better fit for old or severely damaged systems with frequent leaks. Sectional repair and full replacement are therefore different scopes and should not be compared as if they were the same job.
Removal and disposal
HomeGuide's repair guide reports old-gutter disposal at $150–$300 on average or $1–$2 per linear foot. DWELVRA does not automatically add that figure because some contractor quotes may already include removal. Ask for the line item in writing.
Fascia and hidden damage
A replacement project may expose rotted fascia or soffit. Those repairs can change the project total and are not included in this calculator unless the contractor explicitly includes them in the gutter scope.
What can change the final quote?
- Gutter material
- Removal and disposal scope
- Home height
- Roofline complexity
- Fascia or soffit damage
- Downspouts
- Regional labor rates
- Seamless vs. sectional construction
These factors are not represented by hidden multipliers unless the calculator explicitly asks for them.
Questions to ask before hiring
- Does the quote include removing and disposing of the old gutters?
- Is fascia or soffit repair included or separate?
- Will the replacement be seamless or sectional?
- How many downspouts are included?
- What material and gauge are specified?
- What warranty applies to material and workmanship?
FAQ
How much does full gutter replacement cost?
HomeGuide publishes $12–$25 per linear foot for gutter installation or replacement.
Is repairing a few sections cheaper?
It can be. HomeGuide reports $6–$17 per linear foot for replacing damaged sections, but the appropriate scope depends on the system's condition.
Does this calculator include removal?
No automatic removal surcharge is applied. Confirm whether removal and disposal are included in the contractor quote.
Methodology
DWELVRA records the source, date, unit and project scope behind each published cost range. Calculator arithmetic is intentionally simple and visible. Different publishers' datasets are not silently averaged together. Condition-dependent extras stay outside the base formula unless a source supports a clear, comparable adjustment.
Sources
- HomeGuide — Gutter Installation or Replacement Cost — Oct. 28, 2025
- HomeGuide — Gutter Repair Cost — Nov. 7, 2025